The NOR Gate

 The OR Gate - Truth Table, Timing Diagram, Switch Model:

The logic symbol is the same as the OR gate with an inversion bubble placed at the output side. Its function is NOT-OR. It has a similar truth table to that of a NAND gate. Its output is high only when both of the inputs are low. 

Learning Objectives:

• Introducing NOR gate implementation using

• Switches

• Diodes

• BJT

Working:

Case 1: 

Input A = 0

Input B = 0

Output = 1

Case 2:

Input A = 0

Input B = 1

Output = 1

Case 3:

Input A = 1

Input B = 0

Output = 0

Case 4:

Input A = 1

Input B = 1

Output = 0

In figure 1 the waveforms or timing diagram of the NOR gate is also given. The input and output signals are represented by the pulses (a pulse of square wave). There are two inputs A and B and output is Y as shown. The output pulse falls to 0V when any one of the two inputs are high.

Figure 1: NOR gate - schematic symbol, truth table, logical equation and waveforms

Figure 2: Simple circuit simulation results

Truth Table Of 2-Input NOR Gate:

2 Input NOR Gate
Input A	Input B	Output
0	0	1
1	0	0
0	1	0
1	1	0

Logical Expression:

Y = (A + B)C

Logical NOR Gate (Explain with the help of switches) | NOR Gate Switch Logic:

Figure 3: Switch Model of NOR gate

In the above figure, there is a switch model of a NOR gate. It is easy to understand the operation of the gate with the help of switches. The inputs are represented by two switches A and B. The output is represented by an LED. The LED turns ON only when both of the switches are off (open). The only path for the current to flow is from the LED. If anyone switch turns ON, the current will flow from the least resistive path.

Implementation Using Diode Logic

Figure 4: Diode circuit of NOR gate

Case 1:

Both switches are off (opened), and hence both diodes are off. Current flows from V3 to LED and ground.

Case 2:

In case 2, look at the schematic. Switch S1 is ON while S2 is off. The positive terminal of the diode is connected to a 5V source and hence turns on. On the negative terminal of D1, there is a positive potential because of V3. So, there is no or very little current will flow.

Case 3:

Same as case 2.

Case 4:

Same as case 2 and case 3.

Implementation Using Transistor Logic

NOR gate is easily implemented with the help of two BJT transistors. The transistors are connected in differential pair form. It is a common emitter configuration. The output is taken from the collector while the input is at base.

Figure 5: BJT circuit of NOR gate

Case 1:

Look at the schematic diagram in case 1. Both switches are off. Both transistors are off. The only path available for the current is through the LED. And Hence LED glows. 

Case 2:

In case 2, S1 is on and hence Q1 is ON. The current will flow from Q1 to the ground. No current will flow through the LED.

Case 3:

Same as case 2.

Case 4:

Same as case 2 and case 3.

The OR Gate - Truth Table, Circuit Symbol, Diode Circuit & Transistor Circuit

 The OR Gate:

The OR gate performs logical OR function. The output is high when any one input is high. 

Learning Objectives:

• Introducing OR gate implementation using

• Switches

• Diodes

• BJT

Working:

Case 1: 

Input A = 0

Input B = 0

Output = 0

Case 2:

Input A = 0

Input B = 1

Output = 1

Case 3:

Input A = 1

Input B = 0

Output = 1

Case 4:

Input A = 1

Input B = 1

Output = 1

In figure 1 the waveforms or timing diagram of OR gate are also given. The output pulse rises from 0 to 1 when any one of the two inputs are high.

Figure 1: OR Gate circuit symbol, truth table, logical expression and waveforms

Figure 2: OR gate basic working

Truth Table Of OR Gate:

2 Input OR Gate
Input A	Input B	Output
0	0	0
1	0	1
0	1	1
1	1	1

Logical Expression Of OR Gate:

Y = A + B

Logical OR Gate (Explain with the help of switches) | Switch Model and OR Logic:

Figure 3: OR gate switch model

Before starting the circuit model of OR gate, it is better to understand the concept of OR logic with the help of switches. The figure shows the switch model of OR gate. Two switch (switch A and switch B) are connected in parallel in between input and output. Input doesn't reach when both switches are off (open). If anyone switches on (closed) input reaches to output. 

Implementation Of OR Gate Using Diode Logic

Figure 4: OR gate diode circuit

Practically diode circuit models are not used. But for beginners and better understanding of circuit analysis, implementation and designing, it is better to understand this topic.

Case 1:

See schematic in case 1, both inputs are connected to ground. Both diodes (D1 and D2) are off. Output is zero (LED remains off).

Case 2:

See schematic in case 2. Switch S1 is connected to a 5V source, turns on the D1 diode. Switch S2 is connected to the ground, D2 remains off. The current flows from 5V source to LED and the current grounded.

Case 3: 

 This case is the same as case 2.

Case 4:

See schematic in case 4. Both switches (S1 & S2) are connected to a 5V voltage source. As a result both the diodes are turned on. Current flows from 5V sources to the LED and grounded.

Implementation Of OR Gate Using Transistor Logic:

Figure 5: OR gate Bipolar Junction Transistor circuit

Case 1:

Look at the schematic in case 1, both switches are open. There is no voltage at the base. Both transistors are turned off. 

Case 2:

Look at the schematic in case 2, S1 is closed and hence Q1 is turned on. The transistor is in common collector configuration. Output is taken from the emitter. Once the transistor is ON, LED starts to glow. 

Case 3: 

Same as case 2.

Case 4:

Both transistors are ON. Current flows from emitter to collector and hence LED turns ON or output is logic high.