If You want to simulate a circuit, then you have to use that libraries only that are present in pspice folder. Here is the video watch it.
Popular Posts
-
.jpg)
The Ebers Moll Model, Equations For All Modes Of BJT The Ebers Moll Model For Bipolar Junction Tran... -
.jpg)
CE input, output characteristics, input resistance, output resistance, current gain, voltage gain and power gain Look ... -
DC Load Line BJT | Q Point Calculation (BJT) | Base biased amplifier DC analysis Load line and Q point Outline: ...
-
Common Base CB Configuration Common Base Configuration Look at the figure, the input is applied to the emi... -
Tie Set Matrix| Fundamental Loop Matrix This is my third article on electrical network graphs.... -
Mobility and Conductivity of Semiconductors Carriers' mobility and conductivity are important parameters for the operation...
-
Identifying The Mode Of The BJT | DC Analysis Identifying The Mode Of The BJT (DC Analysis Part 2) In a con...
-
Principle of Duality In Electric Circuits It is interesting to know how systems relate to one another. How a mechanical s...
-
Snap Circuits made electronics engineering easy. You dexterously design, build, analyse and draw schematic like a ...
-
Collector Feedback Bias - AC | DC Load Line And Q Point Collector Feedback Bias ...
